Network:

• Network Type: 4G LTE

• Cellular Antenna: Internal

• APN: Auto APN details preloaded

GPS:

• GPS Antenna: Internal

• GPS Tracking: High Sensitivity with 72CH GLONASS

• GPS Amplifier: Low Noise GPS Signal Booster (LNA)

Smart Technology:

• Accident & Rollover Detection:Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before /10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident.

• Driver ID: Options RFID reader, iButton®, or Wiegand interface for Driver ID, access control, and logbooking.

• Driver Safety & Behavior: Monitor speeding, harsh acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles.

• Geofence Alerts: The server can use device location to create geofences and alerts if an asset enters or leaves designated locations.

• Geofence Download to Device: Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts.

2G - Maximum of 20 Geofences with up to 30 points per geofence

LTE-M/NB-IoT - Maximum of 500 Geofences with up to 100 points per geofence.

• Remote Immobilization: Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage.

• GPS Jamming Detection: GPS Jamming or Interference can be detected and alerted on.

Real-Time Tracking: Device remains continuously connected while on the move for real-time asset tracking.

• Preventative Maintenance: Set reminders based on distance traveled and run hours to reduce maintenance and repair costs.

• Lone Worker Safety: Interface a variety of duress pendants to enable man-down alerts for lone worker safety monitoring.

• In-Vehicle Alerts: Can be wired up to external buzzers or lights for in-vehicle alerts.

• Sensor Monitoring: Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.

• Theft Recovery: Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.

• Tamper Alerts: Instant alert if the device is disconnected from its power source

• Run Hour Monitoring: Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization

Backup:

• Flash Memory: Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.

Power:

• Input Voltage: 8-36V DC (max)

• High-Performance Automotive Power Supply: Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in self-resetting fuse makes installation simple and safe.

• Operating Current: LTE-M / NB-IoT:

50mA when moving

+ ≈60mA while internal battery charging

•Intelligent Power Management: Device enters sleep mode when vehicle is inactive to prevent battery drain.

• Slee Current: <1mA

• Backup Battery: 1100mAh LiPo internal backup battery pack.

General:

• IP Rating: IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures.

• Housing: Ultra-Rugged IP67 Housing

• Dimensions: 125 x 80 x 25 mm (4.92 x 3.15 x 0.98”)

• Operating Temperature: -30°C to +60°C (connected to external power)

At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.

• Diagnostic LED: Diagnostic LED indicates operation status

• 3-Axis Accelerometer: 3-Axis Accelerometer to detect movement, high G-force events, and more.

• GPS Antenna: Internal

• Cellular Antenna: Internal

• On-Board Speed & Heading: The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes.

• On-Board Temperature: The device reports internal temperature and prevents the internal battery charging in extreme temperatures. Internal temperature provides an indication of ambient temperature but may not always be precise.

• Installation: 10 wire harness, 1m Length