Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD’s compact performance amplifier is small in size so it fits even the most limited installation areas. The amplifier also uses a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging it.
Specifications
• Power Output: 50 Watts RMS x 4 at 4 Ohms and ≤1% THD+N
• Signal-to-Noise Ratio: 76dBA (Reference: 1 Watt into 4 Ohms)
• Maximum Power Output: 600W
• Signal to Noise Ratio: 89dB (Reference: Rated Power into 4 Ohms at 14.4V)
• Frequency Response: 20Hz-20kHz (+0dB, -1dB)
• Input Impedance: 10k ohm
• Speaker Impedance: 4Ω (allowable range: 2Ω to 8Ω)
• Bridged connection: 4Ω to 8Ω allowable
• Built-in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
• Built-in Variable High-Pass Filter (50Hz-200Hz, -12dB/oct)
• Filter Selector 1: LPF-OFF-HPF
• RCA Input Sensitivity: 0.2V - 5.0V
• Speaker Level Input Sensitivity: 4.0V - 12.0V
• Battery & Ground: Screw Type Terminal Block (Ni) (M4)
• Speaker Output: MOLEX Connector with AWG16 200mm Wire
• Line In: RCA (Ni)
• Dimensions (WxHxD): 6-1/2" x 1-3/4" x 3-7/8" inch
• Weight: 0.767 kg
• Operating Voltage: 14.4V (allowable range: 11-16V)
• Current Consumption: 22A
Key Features:
• CEA-2006 Compliant
• Class D
• 2 Ohms Load Capability
• Speaker Level Input
• Signal Sensing Turn-on
• Power MOS-FET Switching Power Supply
• Extruded Aluminum Heat Sink Design